Type 06602

Type 06602

Safety Valves, angle type, bronze, type tested TÜV-SV.1080. S/G


Standard safety valve with O-ring valve seal, closed bonnet, with lifting device, with enlarged outlet In- and outlet: female thread type G (BSPP) acc. to ISO 228/1


Part No. 06602.1204.0000



Available options - on request only:

- external parts nickel plated


Applications:
Provided as safety device for protection against excessive pressure in pressure vessels and steam boilers. Approved for non-toxic gases, vapours and for saturated steam.
Working temperature: -10°C / +14°F (263K) up to +130°C / +266°F (403K)
 
 
Type 06602
 

Materials

DIN EN

ASME/ASTM

1 Body CC491K B 62 UNS C83600
2 Inlet body CW614N B 111 UNS C28000
3 O-ring EPDM
4 Disc CW614N B 249 UNS C38500
5 Stem CW614N B 249 UNS C38500
6 Bonnet CW614N B 249 UNS C38500
7 Spring 1.4571 A 313 Grade 316Ti
8 Lifting device CW614N B 249 UNS C38500
9 Closing cap CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EG (PED).
 
Type 06602
 

 

Type 06602 Technical data
Nominal size GW 1/2
Orifice d0 12.5
Set pressure range bar 1.2-1.3
Outlet GA 1
Height H 117
Length L1 36
Length L2 42
Wrench size across flats S1 32
Wrench size across flats S2 41
Weight ca. kg 0.65
Coefficient of discharge αw 0.82
Dimensions in mm.



 

Discharge capacities
Calculation of mass flow acc. to AD2000-Merkblatt A2

Medium:
Air in m³/h at 0°C and 1013.25 mbar
Saturated steam in kg/h

The capacity indicated below is for a fully opened valve.

d0 - orifice
A0 - flow area
 

 

Set
pressure
in bar (ü)
GW 1/2 1/2
d0 (mm) 12.5 12.5
A0 (mm²) 122.7 122.7
Medium Air Saturated steam
1.2   159 127
1.3   167 133

For more information about other products please contact the engineering department.

Choose Color