Type 06381

Type 06381

Cryogenic Safety Valves, angle type, stainless steel, PN40, not type tested

metal to metal seated, closed bonnet, Inlet: male thread type G (BSPP) acc. to ISO 228/1 Outlet: female thread type G (BSPP) acc. to ISO 228/1 "cleaned and degreased for oxygen service"

Part No. 06381.X.9005 (0,5 up to 1,5 bar)
Part No. 06381.X.9003 (1,0 up to 4,0 bar)
Part No. 06381.X.9001 (3,0 up to 8,0 bar)
Part No. 06381.X.9002 (7,0 up to 17,0 bar)
Part No. 06381.X.9004 (16,0 up to 21,0 bar)
Part No. 06381.X.9007 (21,0 up to 28,0 bar)
Part No. 06381.X.9006 (28,0 up to 35,0 bar)


Available options - on request only:

- other spring ranges acc. to customer specification



Applications:
Provided as overflow valve for protection against excessive pressure in pipe systems and pressure vessels, which are not subject to approval.
Working temperature: -196°C / -321°F (77K) up to +185°C / +365°F (458K)
 
 
Type 06381
 

Materials

DIN EN

ASTM

1 Outlet body 1.4308 A 351 CF8
2 Inlet body 1.4301 A 276 Grade 304
3 Disc 1.4541 A 276 Grade 321
4 Guide plate 1.4301 A 276 Grade 304
5 Stem 1.4571 A 276 Grade 316Ti
6 Spring 1.4571 A 313 Grade 316Ti
7 Bonnet 1.4308 A 351 CF 8
8 Spring Clamp 1.4301 A 276 Grade 304
9 Adjusting screw 1.4571 A 276 Grade 316Ti
10 Cap 1.4301 A 276 Grade 304
Important: Adjusting ranges of springs are marked with
a label on the bonnet.
Not to use as equipment with safety function acc. to
Pressure Equipment Directive 97/23/EG (PED)
(No CE marking).
 
Type 06381
 

 

Type 06381 Technical data
Nominal size GW 1/2 3/4
Orifice d0 10.5 10.5
Dimension code .X. 1004 1006
Outlet GA 1 1
Height H 137 137
Length L1 36 36
Length L2 34 34
Length A1 14 16
Wrench size across flats S1 30 30
Wrench size across flats S2 41 41
Wrench size across flats S3 30 30
Wrench size across flats S4 22 22
Weight ca. kg 0.77 0.79
 



 

Discharge capacities
Calculation of mass flow acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1

Medium:
Air in m³/h at 0°C and 1013.25 mbar

The capacity indicated below is for a fully opened valve.

d0 - orifice
A0 - flow area
 

 

Set
pressure
in bar (ü)
GW 1/2 & 3/4
d0 (mm) 10.5
A0 (mm²) 86.6
Medium Air
Pressure range in bar   0.5 - 1.5 1.0 - 4.0 3.0 - 8.0 7.0 - 17.0 16.0 - 21.0 21.0 - 28.0 28.0 - 35.0
0.5   8 - - - - - -
1.0   11 6 - - - - -
1.5   14 9 - - - - -
2.0   - 12 - - - - -
3.0   - 21 10 - - - -
4.0   - 32 25 - - - -
5.0   - - 48 - - - -
6.0   - - 76 - - - -
7.0   - - 107 82 - - -
8.0   - - 144 104 - - -
9.0   - - - 128 - - -
10.0   - - - 155 - - -
11.0   - - - 177 - - -
12.0   - - - 217 - - -
13.0   - - - 248 - - -
14.0   - - - 280 - - -
15.0   - - - 319 - - -
16.0   - - - 361 186 - -
17.0   - - - 409 220 - -
18.0   - - - - 263 - -
19.0   - - - - 304 - -
20,0   - - - - 339 - -
21.0   - - - - 383 227 -
22.0   - - - - - 244 -
24.0   - - - - - 278 -
25.0   - - - - - 296 -
26.0   - - - - - 314 -
28.0   - - - - - 353 431
30.0   - - - - - - 461
32.0   - - - - - - 491
34.0   - - - - - - 521
35.0   - - - - - - 536

 

GW 1/2 & 3/4
Part No. spring Pressure range of springs in bar
55345.0113.1767 0.5 -1.5
55345.0116.2767 1.0 - 4.0
55345.0117.1767 3.0 - 8.0
55345.0118.1767 7.0 - 17.0
55345.0120.1767 16.0 - 21.0
55345.0233.0767 21.0 - 28.0
55345.0237.0767 28.0 - 35.0

For more information about other products please contact the engineering department.

Choose Color