DANA PIROOZ KISH

Type 06372

Safety Valves, angle type, bronze, type tested TÜV-SV.749. S/G

Standard safety valve with soft valve seal for saturated steam, air and similar gases, open bonnet, with diaphragm for protection of the spring, with lifting device In- and outlet: female thread type G (BSPP) acc. to ISO 228/1

Part No. 06372.X.0000
with FPM valve seal (PTFE coated)

Applications:
Provided as safety device for protection against excessive pressure in pressure vessels and steam boilers.

Working temperature: -10°C / +14°F (263K) up to +120°C / +230°F (393K), suitable for horizontal installation

Materials		DIN EN	ASME/ASTM
1	Body	CC491K	B 62 UNS C83600
2	Disc nut	CW614N	B 249 UNS C38500
3	Plate	CW507L	B 36 UNS C26800
4	Valve seal	FPM (PTFE coated)
5	Disc	CW614N	B 249 UNS C38500
6	Diaphragm	NBR
7	Stem	CW614N	B 249 UNS C38500
8	Bonnet	CW614N	B 249 UNS C38500
9	Spring	1.4571	A 313 Grade 316Ti
10	Lifting device	CW614N	B 249 UNS C38500
11	Closing cap	CW507L	B 36 UNS C26800

Essential:

Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.

Standard marking acc. to Pressure Equipment
Directive 97/23/EG (PED).

Type 06370	Technical data
Nominal size	GW	3/4
Orifice	d₀	15
Dimension code	.X.	0600
Set pressure range	bar	0.8-1.0
Outlet	GA	3/4
Height	H	111
Length	L₁	30
Length	L₂	25
Wrench size across flats	S₁	32
Weight	ca. kg	0.40
Coeff. of discharge	α_w	0.27

Dimensions in mm.

Discharge capacities
Calculation of mass flow acc. to AD2000-Merkblatt A2

Medium:
A = Saturated Steam in kg/h
B = Air in m³/h at 0°C and 1013.25 mbar

The capacity indicated below is for a fully opened valve.

d₀- orifice
A₀ - flow area