Type 06001 - gastight

Type 06001 - gastight

Cryogenic Safety Valves, angle type, brass, PN63, type tested TÜV-SV.1048. S/G/L

Standard Safety Valve, complete with carbon filled PTFE valve seal, closed bonnet, gastight Outlet: female thread Rc 3/8 acc. to ISO 7/1 "cleaned and degreased for oxygen service"

Part No. 06001.X.0000

Inlet: male thread type R (BSPT) acc. to ISO 7/1
Part No. 06001.X.2000
Inlet: male thread type G (BSPP) acc. to ISO 228/1
Part No. 06001.X.5000
Inlet: male thread NPT acc. to ANSI B 1.20.1

Available options - on request only:

- with installed elbow at the outlet


Applications:
Provided as safety device for protection against thermal expansion in pipeworks and parts of facilities. Approved for air gases, vapours and cryogenic liquefied gases incl. LNG.
Working temperature: -196°C / -321°F (77K) up to +65°C / +149°F (338K), suitable for horizontal installation
 
 
Type 06001 - gastight
 

Materials

DIN EN

ASME/ASTM

1 Body CW610N B 111 UNS C36500
2 Disc PTFE / Carbon filled (25%)
3 Guide plate CW614N B 283 UNS C38500
4 Stem CW614N B 283 UNS C38500
5 Spring 1.4571 A 313 Grade 316Ti
6 Bonnet CW614N B 283 UNS C38500
7 Spring clamp CW614N B 283 UNS C38500
8 Thread ring CW614N B 283 UNS C38500
9 Cap CW614N B 283 UNS C38500
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EG (PED).
 
Type 06001 - gastight
 

 

Type 06001 Technical data
Nominal size GW 1/4 3/8 1/2
Orifice d0 6.0 6.0 6.0
Dimension code .X. 0200 0300 0400
Set pressure range bar 5.0-55.0 5.0-55.0 5.0-55.0
Height H 70 70 70
Length L1 13 15 17
Length L2 13 13 13
Wrench size across flats S1 19 19 19
Wrench size across flats S2 19 19 19
Weight ca. kg 0.18 0.195 0.21
Coefficient of discharge αw 0.09 0.09 0.09
Dimensions in mm.



 

Discharge capacities
Calculation of mass flow acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1

Medium:
Air in m³/h at 0°C and 1013.25 mbar
Water in kg/h

The capacity indicated below is for a fully opened valve.

d0 - orifice
A0 - flow area
 

 

Set
pressure
in bar (ü)
GW 1/4, 3/8 & 1/2 1/4, 3/8 & 1/2
d0 (mm) 6.0 6.0
A0 (mm²) 28.3 28.3
Medium Air Water
5.0   11.3 303
6.0   13.3 332
7.0   15.2 359
8.0   17.1 384
9.0   19.1 407
10.0   21.0 429
12.0   24.9 470
14.0   28.7 508
16.0   32.6 543
18.0   36.4 576
20.0   40.7 607
22.0   44.5 637
24.0   48.4 665
26.0   52.3 692
28.0   56.2 719
30.0   60.6 744
32.0   64.6 768
34.0   68.5 792
36.0   72.4 815
38.0   76.3 837
40.0   80.9 859
42.0   84.9 880
44.0   88.9 901
46.0   92.8 921
48.0   96.8 941
50.0   101.6 960
52.0   105.6 979
54.0   109.6 998
55.0   111.6 1007

For more information about other products please contact the engineering department.

Choose Color