Type 06603

Type 06603

Safety Valves, angle type, bronze, type tested TÜV-SV.1080. S/G


Standard safety valve with O-ring valve seal, closed bonnet, with lifting device, with enlarged outlet In- and outlet: female thread type G (BSPP) acc. to ISO 228/1


Part No. 06603.1204.0000



Available options - on request only:

- external parts nickel plated


Applications:
Provided as safety device for protection against excessive pressure in pressure vessels and steam boilers. Approved for non-toxic gases, vapours and for saturated steam.
Working temperature: -10°C / +14°F (263K) up to +180°C / +356°F (453K) For saturated steam use only up to 3 bar and +135°C / +275°F (408K)
 
 
Type 06603
 

Materials

DIN EN

ASME/ASTM

1 Body CC491K B 62 UNS C83600
2 Inlet body CW614N B 111 UNS C28000
3 O-ring EPDM
4 Disc CW614N B 249 UNS C38500
5 Stem CW614N B 249 UNS C38500
6 Bonnet CW614N B 249 UNS C38500
7 Spring 1.4571 A 313 Grade 316Ti
8 Lifting device CW614N B 249 UNS C38500
9 Closing cap CW507L B 36 UNS C26800
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EG (PED).
 
Type 06603
 

 

Type 06603 Technical data
Nominal size GW 1/2
Orifice d0 12.5
Set pressure range bar 0.2-5
Outlet GA 1
Height H 145
Length L1 36
Length L2 42
Wrench size across flats S1 32
Wrench size across flats S2 41
Weight ca. kg 0.7
Coeff. of discharge from 3.0 bar αw 0.74
Dimensions in mm.



 

Discharge capacities
Calculation of mass flow acc. to AD2000-Merkblatt A2

Medium:
Air in m³/h at 0°C and 1013.25 mbar
Saturated steam in kg/h

The capacity indicated below is for a fully opened valve.

d0 - orifice
A0 - flow area
 

 

Set
pressure
in bar (ü)
GW 1/2 1/2
d0 (mm) 12.5 12.5
A0 (mm²) 122.7 122.7
Medium Air Saturated steam
0.2   50 43
0.5   79 66
1.0   120 96
1.5   160 128
2.0   196 154
2.5   231 182
3.0   267 208
3.5   301 235
4.0   335 260
4.5   369 287
5.0   404 311

For more information about other products please contact the engineering department.

Choose Color