Type 06316

Type 06316

Safety Valves, angle type, stainless steel, type tested, TÜV-SV.980. S/G/L

Standard safety valve metal to metal seated, closed bonnet Inlet: male thread type G (BSPP) acc. to ISO 228/1 Outlet: female thread type G (BSPP) acc. to ISO 228/1

Part No. 06316.X.N000 (0.1 - 68.0 bar)
Part No. 06316.X.L000 (68.0 - 330.0 bar)

with lifting device - head A
Part No. 06316.X.N020 (0.1 - 68.0 bar)
Part No. 06316.X.L020 (68.0 - 330.0 bar)

with gastight cap - head C

Available options - on request only:

- Threads NPT acc. to ANSI B 1.20.1
- Disc with soft sealing (NBR, CR, EPDM, FKM, FFKM, PCTFE, PTFE-FDA)



Applications:
Provided as safety device for protection against excessive pressure in pressure vessels. Approved for gases, vapours and fluids.
Working temperature (pay attention to AD-Merkblatt W10: Temperature-Pressure- Overview): -270°C / -454°F (6K) up to +280°C / +536°F (553K)
 
 
Type 06316  Type 06316
 

Materials

DIN EN

ASME/ASTM

1 Outlet body 1.4404 A 276 Grade 316L
2 Inlet body 1.4404 A 276 Grade 316L
3 Disc 1.4404 A 276 Grade 316L
4 Stem 1.4404 A 276 Grade 316L
5 Spring 1.4310 A 313 Grade 301
6 Lifting device 1.4404 A 276 Grade 316L
7 Cap 1.4404 A 276 Grade 316L
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EG (PED).
Marking acc. to ASME Code Section VIII will only
be carried out by written notice on purchase order.
 
Type 06316
 

 

Technical data Type 06316.X.N000/N020 Type 06316.X.L000/L020
Nominal size GW 1/2 3/4 1/2 3/4 1/2 3/4
Orifice d0 10 10 6 6 10 10
Dimension code .X. 1004 1006 0604 0606 1004 1006
Set pressure range bar 0.1-68 0.1-68 180-330 180-330 68-180 68-180
Outlet GA 1/2 1/2 1/2 1/2 1/2 1/2
Height H1 195 195 - - - -
Height H2 - - 201 201 216 216
Height H3 180 180 - - - -
Height H4 - - 191 191 191 191
Length L1 30 30 30 30 30 30
Length L2 33 33 33 33 33 33
Length A1 15 16 15 16 15 16
Weight ca. kg 1.2 1.2 1.4 1.4 1.4 1.4
Coeff. of discharge gases, vapours αw 0.50 0.50 0.72 0.72 0.50 0.50
Coeff. of discharge fluids αw 0.35 0.35 - - 0.35 0.35
Dimensions in mm.



 

Discharge capacities
Calculation of mass flow acc. to AD2000-Merkblatt A2

Medium:
A = Saturated steam in kg/h
B = Air in m³/h at 0°C and 1013.25 mbar
C = Water in kg/h at 20°C

The capacity indicated below is for a fully opened valve.

d0 - orifice
A0 - flow area
 

 

Set
pressure
in bar (ü)
GW 1/2 & 3/4
d0 (mm) 6 10
A0 (mm²) 28.3 78.5
Medium B A B C
0.1   - 12 14 630
0.5   - 29 34 1080
1.0   - 43 51 1470
2.0   - 70 84 2070
3.0   - 94 115 2540
4.0   - 118 145 2930
5.0   - 141 174 3280
6.0   - 164 204 3590
8.0   - 209 262 4150
10.0   - 255 321 4640
15.0   - 369 468 5680
20.0   - 483 615 6560
25.0   - 596 762 7330
30.0   - 712 909 8030
40.0   - 943 1204 9270
50.0   - 1181 1498 10400
60.0   - 1421 1792 11400
70.0   - 1670 2086 12300
80.0   - 1921 2380 13100
100.0   - 2451 2969 14700
150.0   - 4044 4439 18000
180.0   2759 - 5322 19700
200.0   3064 - - -
250.0   3826 - - -
300.0   4589 - - -
330.0   5046 - - -

For more information about other products please contact the engineering department.

Choose Color