Type 06216, Type 06217 with protection cap

Type 06216, Type 06217 with protection cap

Safety Valves, brass,
type tested TÜV-SV.1090 S/G



Standard safety valve with FPM valve seal, open bonnet, with discharge holes Inlet: male thread type G (BSPP) acc. to ISO 228/1


Part No. 06216.X.0001
Part No. 06217.X.0001

with lifting device and protection cap (polycarbonate)

Available options - on request only:

- stainless steel spring - material 1.4571
- external parts nickel plated


Applications:
Provided as safety device for protection against excessive pressure in stationary and moveable gas cylinders and pressure vessels. Approved for air and similar gases.
Working temperature: -30°C / -22°F (243K) up to +130°C / +266°F (403K), suitable for horizontal installation
 
 
Type 06216, Type 06217 with protection cap  Type 06216, Type 06217 with protection cap
 

Materials

DIN EN

ASME/ASTM

1 Body CW617N B 283 UNS C37700
2 Valve seal FPM (Viton-GLT)
3 Disc CW614N B 455 UNS C38500
4 Stem CW614N B 455 UNS C38500
5 Bonnet CW614N B 455 UNS C38500
6 Spring 1.1200 A 227
7 Stem guide PTFE
8 Cap CW614N B 455 UNS C38500
9 Lifting device CW614N B 455 UNS C38500
10 Closing cap CW507L B 36 UNS C26800
11 Protection cap  
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EG (PED).
Marking acc. to ASME Code Section VIII will only
be carried out by written notice on purchase order.
 
Type 06216, Type 06217 with protection cap
 

 

Type 06216, Type 06217 Technical data
Nominal size GW 1/2 3/4 1 1-1/4 1-1/2 2
Orifice d0 12 15 20 25 32 40
Dimension code .X. 0400 0600 1000 1200 1400 2000
Set pressure range bar 0.2-25 0.2-30 0.2-30 0.2-22 0.2-16 0.2-12
Height H1 103 122 149 169 198 224
Height H2 107 126 150 172 200 228
Length L2 14 16 18 20 22 25
Diameter D 41.4 49.0 62.5 74.8 86.0 109.0
Wrench size across flats S1 27 32 41 50 55 70
Weight ca. kg 0.25 0.41 0.72 1.23 1.73 3.09
Coeff. of discharge from 3.0 bar αw 0.83 0.83 0.73 0.71 0.69 0.66
Coeff. of discharge from 3.0 bar rated slope 2.59 4.10 6.79 10.15 16.50 24.80
Dimensions in mm.



 

Discharge capacities

Medium:
Air in m³/h at 0°C and 1013.25 mbar
Air in SCFM at 60°F (15.6°C) and 14.7 psia (1013.25 mbar)

The capacity indicated below is for a fully opened valve.

d0 - orifice
A0 - flow area
 
Calculation of discharge capacity acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1 resp. ASME Code Sec. VIII. The safety valve is marked with the lower capacity of both calculations.
 

 

Set
pressure
in bar (ü)
GW 1/2 3/4 1 1-1/4 1-1/2 2
d0 (mm) 12.0 15.0 20.0 25.0 32.0 40.0
A0 (mm²) 113.1 176.7 314.2 490.9 804.2 1256.6
Medium Air in m³/h
0.2   46 74 121 183 299 411
0.5   81 130 205 300 503 691
1.0   124 196 307 459 775 1085
2.0   195 307 495 752 1214 1760
3.0   260 412 674 1021 1630 2436
4.0   326 518 845 1282 2046 3057
5.0   394 622 1017 1542 2461 3679
6.0   460 728 1189 1803 2877 4300
7.0   526 833 1361 2063 3293 4921
8.0   593 939 1533 2324 3709 5543
9.0   659 1044 1704 2584 4124 6164
10.0   725 1148 1876 2843 4540 6785
12.0   859 1359 2220 3364 5371 8028
14.0   992 1569 2563 3885 6203 -
16.0   1124 1780 2907 4406 7034 -
18.0   1257 1991 3251 4927 - -
20.0   1389 2200 3594 5448 - -
22.0   1523 2410 3938 5969 - -
25.0   1722 2726 4453 - - -
26.0   - 2832 4625 - - -
28.0   - 3042 4969 - - -
30.0   - 3253 5312 - - -

 

Set
pressure
in bar (ü)
GW 1/2 3/4 1 1-1/4 1-1/2 2
d0 (inch) 0.472 0.591 0.787 0.984 1.260 1.575
A0 (in²) 0.175 0.274 0.487 0.761 1.247 1.948
Medium Air in SCFM
15   78 124 194 290 490 687
30   127 195 315 479 773 1123
50   191 285 466 710 1130 1688
60   221 330 540 822 1308 1955
70   251 375 614 933 1486 2222
80   281 421 688 1045 1665 2488
90   312 466 762 1157 1843 2755
100   341 511 835 1269 2022 3022
120   402 601 981 1492 2376 3551
130   432 646 1055 1604 2554 3818
140   462 691 1129 1716 2733 4084
150   492 736 1203 1828 2911 4351
160   522 781 1277 1940 3090 4618
174   565 845 1380 2098 3340 4992
180   583 872 1424 2164 3446 -
190   613 917 1498 2276 3624 -
200   643 962 1572 2388 3803 -
220   703 1052 1719 2613 4160 -
232   739 1106 1807 2747 4374 -
240   764 1142 1866 2836 - -
260   824 1232 2014 3060 - -
280   884 1323 2161 3284 - -
300   945 1413 2308 3509 - -
319   1002 1498 2448 3721 - -
340   1065 1593 2603 - - -
363   1134 1697 2772 - - -
380   - 1774 2897 - - -
400   - 1864 3045 - - -
420   - 1954 3192 - - -
435   - 2022 3302 - - -

For more information about other products please contact the engineering department.

Choose Color