Type 06810, Type 06815

Type 06810, Type 06815

Safety Valves, angle type, stainless steel, type tested, TÜV-SV.1130. S/G/L

Standard safety valve metal to metal seated, "cleaned and degreased for oxygen service" closed bonnet, gastight cap or lifting device Inlet: male thread type G (BSPP) acc. to ISO 228/1 Outlet: female thread type G (BSPP) acc. to ISO 228/1

Part No. 06810.X.000000M (Pmax 16.0 bar)
Part No. 06810.X.000000H (Pmax 180.0 bar) stellited version

with gastight cap

Part No. 06815.X.000000M (Pmax 16.0 bar)
Part No. 06815.X.000000H (Pmax 180.0 bar) stellited version

with lifting device

Available options - on request only:

- Flange-, NPT- or Tri-Clamp connection for in- and outlet



Applications:
Provided as safety device for protection against excessive pressure in gas cylinders and pressure vessels. Approved for gases, vapours and liquids.
Working temperature: -270°C / -454°F (3K) up to +400°C / +752°F (673K) Pressure-temperature must be observed, suitable for horizontal installation from 20 bar
 
 
Type 06810, Type 06815  Type 06810, Type 06815
 

Materials

DIN EN

ASME/ASTM

1 Outlet body 1.4408 A 351 CF 8M
2 Inlet body 1.4571 A 276 Grade 316Ti
3 Disc 1.4571 A 276 Grade 316Ti
4 Stem 1.4404 A 276 Grade 316L
5 Bonnet 1.4408 A 351 CF8M
6 Spring 1.4571 A 313 Grade 316Ti
7 Cap 1.4408 A 351 CF8M
8 Lifting cap 1.4408 A 351 CF8M
9 Lever 1.4301 A 276 Grade 304
Essential: Valves are delivered at a set pressure,
therefore when ordering please confirm set
pressure, medium and temperature.
Standard marking acc. to Pressure Equipment
Directive 97/23/EG (PED).
 
Type 06810, Type 06815
 

 

Type 06810, 06815 Technical data
Nominal size GW 1/2 1/2 3/4
Orifice d0 10.0 10.0 10.0
Dimension code .X. 1022 1023 1033
Set pressure range bar 0.5-180 0.5-180 0.5-180
Outlet GA 1/2 3/4 3/4
Height H1 230 230 230
Length L1 44 44 44
Length L2 29 29 29
Length A1 14 14 16
Weight 06810 ca. kg 1.8 1.8 1.8
Weight 06815 ca. kg 2.0 2.0 2.0
Coeff. of discharge gases, vapours αw 0.5 0.5 0.5
Coeff. of discharge fluids αw 0.5 0.5 0.5
Dimensions in mm.



 

Discharge capacities
Calculation of mass flow acc. to AD2000-Merkblatt A2 / DIN EN ISO 4126-1

Medium:
A = Saturated steam in kg/h
B = Air in m³/h at 0°C and 1013,25 mbar
C = Water in kg/h at 20°C

The capacity indicated below is for a fully opened valve.

d0 - orifice
A0 - flow area
 

 

Set
pressure
in bar (ü)
GW 1/2 & 3/4
d0 (mm) 10.0
A0 (mm²) 78.5
Medium A B C
0.5   32 39 1548
1.0   44 55 2096
2.0   67 85 2965
3.0   90 115 3632
4.0   112 145 4193
5.0   134 174 4688
6.0   156 204 5136
7.0   178 234 5548
8.0   200 264 5931
9.0   222 294 6290
10.0   244 324 6631
12.0   288 383 7264
14.0   331 443 7846
16.0   375 502 8387
18.0   418 561 8896
20.0   462 627 9377
25.0   570 777 10484
30.0   680 935 11485
35.0   788 1087 12405
40.0   897 1249 13262
45.0   1008 1401 14066
50.0   1118 1567 14827
60.0   1341 1889 16243
70.0   1562 2216 17544
80.0   1788 2545 18755
90.0   2013 2878 19893
100.0   2244 3212 20969
120.0   2723 3876 22971
130.0   2972 4197 23909
140.0   - 4548 24811
160.0   - 5213 26524
180.0   - 5861 28133
Pressure-Temperature Rating
 

For more information about other products please contact the engineering department.

Choose Color